SMF-100 PRIME / ULTRA
VERY SIMPLE
SMF-100 PRIME/ULTRA
2-3 Stage, All-In-One
Features
This is a premium water purifier that can be easily installed in narrow spaces, whether above or below the sink.
One Filter Only
Pure and clean water, achieved with just one filter.
No Need Electricity
It is a water purifier that does not require electric power.
Fast & Easy Installation
It is easy and fast to install with a cartridge-type filter configuration.
Easy Filter Replacement
The filter is easy to attach and detach, so anyone can replace it.
SIMPLE WATER PURIFIER
Simply attach the bracket to the wall and slot it in—it's that easy.
SIMPLE & EASY
- The system includes a single filter.
- It is hygienic, as there is no water tank.
- It can be installed in compact spaces.
SMF-100 ULTRA
- Stage-1 Sediment
- Stage-2 Block-Carbon
- Stage-3 UF-Membrane
- Three-stage filtration with a single filter.
SMF-100 PRIME
- Stage-1 Sediment
- Stage-2 Block-Carbon
- Two-stage filtration with a single filter.
FILTER CONFIGURATION
- When used with the PVDF water purifier,
- Only the SMF-100 filter is used.
- If not, a PRE-Membrane filter should be added upfront to extend the filter's lifespan.
- It is not recommended to use the system without PVDF or a PRE-Membrane filter.
Product Information
SMF-100 PRIME / ULTRA
Water Purifying System
Nanocare System
Product Size (mm)
SMF-100 : 90(D) x 330(L)
Product Weight
SMF-100 : 1kg
Purifying Capacity
1.5 liter/m
Power
No need power
Required Water Pressure
14.2 ~ 71 psi
FAQ
A few things clients normally ask us about SMF-100.
Is the SMF-100 PRIME / ULTRA finished product?
- It is a finished product equipped with filters and fittings inside the water purifier.
- Filter flushing must be done separately during installation.
Is the water obtained through this SMF-100 PRIME / ULTRA water purifier safe to drink?
- Yes, there is no problem with drinking water obtained through the SMF-100 PRIME / ULTRA water purifier.
- However, considering the water quality supplied, there is a problem with filters needing to be replaced more often than recommended for hygiene and safety.
- To solve this problem, we recommend installing the PVDF water purifier together.
Is it necessary to install the PVDF water purifier to use this product?
- No, however, it is not recommended to use this product alone without a pre-treatment filter.
- We offer the PRE-UF filter, which provides the same functionality as the PVDF water purifier.
- Simply install the PRE-UF filter in front of the SMF-100.
- If you wish to have clean water throughout your entire home, we recommend installing the PVDF water purifier alongside it.
Can I have hot and cold water?
- It is a direct water purifier that does not provide cold and hot water.
What is the length of the faucet?
- Height : 105mm
- Length : 205mm
Is it possible to install it alone?
- Installation is simple as long as you attach the adapter and flush the filter.
How to Install : SMF-100
The common tasks before installing a filter.
Close the water supply valve to install the adapter.
Remove the cold water hose and attach the adapter.
Install the cooking water valve on the sink.
WITH PVDF(WHP-3000)
The supplied water is thoroughly treated to ensure safe installation.
Connect the hose to the adapter and the cooking water valve pipe, respectively.
Open the adapter and the water supply valve to provide water to the purifier.
WITHOUT PVDF(WHP-3000)
Install a pre-membrane filter alongside the SMF-100 filter to provide protection.
Connect the hose to the adapter and the cooking water valve pipe, respectively.
Open the adapter and the water supply valve to provide water to the purifier.
