Water Purifier Filter

8-Inch Filter

Made in KOREA / NANOCARE

8-Inch Filter Set

This filter is used in most sink-top / under-sink water purifiers.

Applicable Model : WPU Series / WFP-2030 / WHP-3920 / LUXE 1680 / ULTRA 2200 / RÖNTGEN UV / All kinds of UF Model

Features

The highest quality filter ensures the best water quality as drinking water.

Made in KOREA

All filters are manufactured in Korea.

Advanced Technology

The technology to organize and pack the material of the filter is the best.

Highest Quality

All filters are manufactured using only the highest quality materials that are globally certified.

Compact Size

Considering the size of the water purifier and the amount of water purification, the most appropriate size, 10-inch / 8-inch filter, has been standardized.

4-STEP FILTER

It is a 4-stage filter that boasts enhanced safety, using top-tier certified materials at every stage.

STAGE 1 / SEDIMENT FILTER

The sediment filter has the following key features:

  • Effectively removes sediments such as dirt, rust, and dust from the water.
  • The WATERPIA Nano Sediment Filter is crafted from premium-quality micro materials.
  • The polypropylene material inside the filter is NSF certified, ensuring enhanced reliability.

STAGE 2 / PRE-CARBON FILTER

The pre-carbon filter has the following key features:

  • Adsorbs and removes organic compounds and unpleasant odors, providing water closer to its natural state.
  • The block-type pre-carbon filter is made with high-quality Kuraray activated carbon, certified by NSF.
  • A premium product, meticulously crafted to ensure exceptional performance.

STAGE 3 / NANOCARE FILTER

The nanocare filter has the following key features:

  • Utilizes advanced nano materials developed by KX-TECH, USA.
  • Effectively removes 99.99% of norovirus, common bacteria, and heavy metals while preserving essential minerals.
  • Provides exceptional filtration performance with cutting-edge technology.

STAGE 4 / POST-CARBON FILTER

The post-carbon filter has the following key features:

  • Crafted with coconut activated carbon in a block form for enhanced efficiency.
  • Effectively removes organic compounds such as residual chlorine, pesticides, and carcinogens.
  • Adsorbs unpleasant odors, providing water closer to its natural state.

Product Information

8-inch Filter Set

Manufacturer

Waterpia Inc. (Korea)
Activated Carbon : Kuraray (Japan)
Nano Filter : KX-TECH (US)

Product Size (mm)

8-inch : 64(D)x240(H)

Applicable Model

Ours : WFP-2030 / WHP-3920 / WPU Series
Others : LUXE 1680 / ULTRA 2200 / RÖNTGEN UV
All types of cartridge-type water purifiers

8-inch Filter Configuration with PVDF Water Purifier

Create a safe and clean water purification environment with the WHP-3000 PVDF raw water treatment system.

PVDF + BASIC SET

  • The PVDF water purifier effectively removes basic impurities from the incoming raw water, protecting the performance of the purifier filters.
  • This setup is provided as a standard package.
  • Simply use the filter according to its recommended lifespan and replace it at the appropriate time.
  • The diagram provided is for illustrative purposes to aid understanding.
  • VIEW WHP-3000

PVDF + ALKALINE SET

  • A special filter with additional functionality is used to obtain mildly alkaline water.
  • If there is enough space for installation, the filter can be added after the 4th stage filter.
  • If installation space is limited, it is installed as a replacement for the 4th-stage post-carbon filter.
  • There is no technical concern regarding the replacement of the 4th filter in this case.
  • The alkaline filter contains sufficient carbon, enabling it to also perform the function of the 4th stage filter.
  • The diagram provided is for illustrative purposes to aid understanding.

8-inch Filter Configuration with PRE-Membrane Filter

In the absence of the WHP-3000, a dedicated pre-treatment filter for water purifiers ensures a safe and clean water purification environment.

PRE-Membrene + BASIC SET

  • If the incoming raw water is unsuitable for use with the purifier, it is not recommended to configure the system with the standard set without pre-treatment.
  • We supply a pre-membrane filter set that performs the same function as the PVDF water purifier, replacing the first sediment filter in the standard set.
  • The pre-membrane filter is capable of lasting up to 12 months under normal water quality conditions, but it is recommended to replace it every 3 months.
  • Other filters should also be used according to their recommended lifespan and replaced at the appropriate time.
  • The diagram provided is for illustrative purposes to assist with understanding.
  • VIEW PRE-Membrane

PRE-Membrene + ALKALINE SET

  • A special filter with additional functionality is used to obtain mildly alkaline water.
  • If there is enough space for installation, the filter can be added after the 4th stage filter.
  • If installation space is limited, it is installed as a replacement for the 4th-stage post-carbon filter.
  • There is no technical concern regarding the replacement of the 4th filter in this case.
  • The alkaline filter contains sufficient carbon, enabling it to also perform the function of the 4th stage filter.
  • The diagram provided is for illustrative purposes to aid understanding.

FAQ

A few things clients normally ask us about water purifier filter.

Is there no additional cost burden when using a pre-membrane instead of a regular sediment filter?
  • Of course, it is not cheaper than the sediment filter.
  • However, with an additional cost of around 100 pesos per unit, it is not an overly burdensome expense.
Even though the same filter is used, is there a reason why the taste of water varies depending on the location?
  • The characteristics of water can vary depending on its source, specifically the types and concentrations of minerals and salts it contains.
  • The three main dams near Manila and Laguna Lake serve as key water sources.
  • Depending on which of the four sources Maynilad and Manila Water draw from, the water characteristics may differ.
  • However, there is no correlation between the taste of the water and its quality, so there is no need to worry.
Do I have to replace accessories like L-fitting, tubing hose, faucet, etc?
  • Accessories such as fittings, tubing hoses, and faucets are consumables.
  • If used for a long time, it is recommended to replace it every one to two years because there is a risk of water stains and leakage inside.
I want to buy a filter in advance, can I keep it for a long time?
  • Long-term storage is possible if water is not passed through the filter.
  • Avoid direct sunlight and store in a cool place that is not humid.
What does the date on the filter mean?
  • The date written on the filter is its date of manufacturing.
Do I have to flush the filter individually when I change it?
  • Flushing is the process of removing air and various components (carbon, film preservation liquid) from the inside using water.
  • For effective flushing, each filter must be carried out.
Why is there black water and powder?
  • The 2nd, 4th and alkaline filters are made of activated carbon material, so activated carbon dust may come out during initial installation or replacement.
  • Flushing is performed until no black water or black powder is produced.
  • It is more effective if you use a tool such as a spoon to lightly tap the filter and flush it.
  • Drinking water mixed with black powder is harmless to the human body.
Why does the water bubble and turn blurry after changing the filter?
  • The first time you install the filter, the remaining air inside the filter comes out with water.
  • In addition, the carbon dust in the filter can come into contact with water and form white fine bubbles, which is a natural phenomenon.
  • For direct water purifiers, symptoms disappear when the inside of the filter is filled with water.
  • For cold water purifiers, bubbles disappear while water is stored in the reservoir.

Fitting Connection/Removal & Flushing Method

Following the instructions makes it easy and simple.

Fitting Connection

  • Improper connections may result in the risk of leaks.
  • When connecting the fittings to the filter and hose, please push them firmly to the end to prevent leaks.
  • After installation, be sure to perform a leak check.

Fitting Removal

  • It may be difficult to disconnect the fittings under vacuum inside the hose.
  • Be sure to close the raw water valve first, then open the treated water valve to drain the water.
  • Afterwards, begin disconnecting the fittings.
  • Insert a fitting separator between the filter nozzle and the fitting.
  • Use the lever principle to push the fitting upwards and disconnect it.
  • If you do not have a fitting separator, use a spoon instead.

Filter Flushing

  • Flushing must be performed individually for each filter.
  • For the 2nd and 4th stage filters and the alkaline filter, use a tool such as a spoon to gently tap the filter while flushing.
  • This will effectively remove any remaining carbon powder.
  • The 1st and 3rd stage filters should be flushed with more than 2 liters of water.
  • The 2nd and 4th stage filters, as well as the alkaline filter, should be flushed until no black water or residue remains.